CyberDeck PiBerry 1.7 - Raspberry Pi Zero Handheld

Our PiBerry v1.7 is an enthusiast's dream, a minimalistic open-source Cyber Handheld.
The PCB is compatible with various parts and can be put together with minimal to no soldering.

Designed to host a Raspberry Pi Zero 2W on its back, a variety of compatible 3.5" touch displays like Adafruit models, iUniker, or Waveshare, and a Blackberry Zitao Q20 keyboard with a trackpad that works like a cursor. Most phone battery packs should provide enough power (5-V, 1A), alternatively, an APU can be mounted or installed inside the case.

Limited KITs are NOW Available, as well as pre-builds, 3D-STL, and printed cases, we have the keyboards in stock.

****NOTE****
You may add a note with your preferred OS, otherwise the default is Kali OS with our compatible apps, and docs from our CyberDeck builds.

We now include a 16GB SD card with tools and drivers

RTP = Ready to play, and includes PCB, LCD, Pi, KB-keyboard (you may request it as built or just the kit DIY)
You may order parts separately by adding them to the cart
3D - Case - Includes a 3D printed case (Black, White)
MicroSD-IMAGE-xx will come imaged with drivers, and tools, ready for use.

Video and Photos have been added as an example of a finished build, and for inspiration.
The parts list BOM can be found here documentation

Pi Zero 2W Specs
1GHz quad-core 64-bit Arm Cortex-A53 CPU
512MB SDRAM
2.4GHz 802.11 b/g/n wireless LAN
Bluetooth 4.2, Bluetooth Low Energy (BLE), onboard antenna
Mini HDMI® port and micro USB On-The-Go (OTG) port
microSD card slot
CSI-2 camera connector
H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30)
OpenGL ES 1.1, 2.0 graphics
Micro USB power
Composite video and reset pins via solder test points

Display Specs
We recommend the iUniker 3.5” for an easier install as it has male GPIO from factory
3.5 inch 60+ fps 480x320 Resolution Touchscreen for Raspberry Pi Zero High Speed Screen for Raspberry Pi Zero W 2/Pi Zero W/Zero 1.3

WaveShare 3.5 RPi LCD - A, B, C
480 x 320, 3.5inch Touch Screen TFT LCD Designed for Raspberry Pi, 125MHz High-Speed SPI
Includes Touch Pen

If you have any questions or need support don’t hesitate to contact us!