USB GPS Receiver Antenna Gmouse for Laptop, Marine Navigation/Linux/Raspberry Pi

Description

How to work with Raspberry Pi?
Just install GPS, set the config to /dev/ttyAMA0, plugged into a USB port and rebooted
Easy to set 5hz/10hz USB GPS frequency.
Some of our customers can use this device on a Macbook with GPSD for BSD Linux, just Google it and follow the instructions.
Please Search U-CENTER V8.29 and install it. the USB serial port driver or sensor driver will automatically installed. then choose port or sensorAPI, this device will work well.
This device is Powered by a Ublox GPS chipset, High sensitivity, and Strong signal. The u-center GNSS evaluation software for automotive, mobile terminal, and infrastructure applications provides a powerful tool for the evaluation, performance analysis, and configuration of u-blox GNSS receivers. Its unique flexibility makes the u-center GNSS evaluation software an invaluable tool for the evaluation, analysis, and configuration of u-blox GNSS receivers. u-blox GNSS receivers can be configured using the u-center evaluation software

Electrical Characteristics:
1.GPS Chipset: U-BLOX UBX-G7020
2.Sensitivity: -162 dBm ~-158 dBm
3.Channels: 56 channelS

Specifications:
1.USB Cable length: 2M
2.Dimension: 45*38*13 mm
3.Connector: USB Port 4. Magnetic Base

Protocol:
1.NMEA 0183 v2.3
2.Support:VTG,GLL,TXT ublox binary and NMEA Command
3.Default:GGA,GSA,GSV,RMC

Package Include:
1.GPS Receiver *1 2.GPS Driver Disc *1 1.NMEA 0183 v2.3
2.Support:VTG,GLL,TXT ublox binary and NMEA Command
3.Default:GGA,GSA,GSV,RMC

Package Include:
1.X1 USB GPS Receiver
2.X1 USB GPS Driver Disc *1